3105 Platen Locator Tabs
Adjustment
1.
Remove the access cover (3051).
2.
Remove the platen (3101).
3.
Set the copy-control dial to O.
4.
Bend the locator tabs
G
so that a gap is present
between the paper deflector
0
and the print head
tiP • .
5.
Move the print head and check the gap in the
middle and right side of the print line.
6.
Restore the copy-control dial to the original
setting.
7.
Reinstall the platen (3101).
8.
Reinstall the access cover (3051).
touch
Papere
deflector
Right side view
Note: Print head must be centered for platen removal and replacement.
Maintenance Procedures
3-15