Table of Contents
Advertisement
3502 Logic/Control Board Safety Cover
Removal
1.
Remove the top cover (3052).
2.
Remove the cover mounting screw
G.
3.
Pull the cover forward until the cover mounting
tabs. are out of the openings in the rear and left
mounting clips.
3-102 SY34-0613
Reinstallation
1.
Place the cover mounting tabs •
into the
openings in the rear and left mounting clips.
2.
Lower the cover into place and install the cover
mounting screw
G.
3.
Reinstall the top cover (3052).
Advertisement
Table of Contents
