Table of Contents
Advertisement
Model02L
•
•
•
Switches function only when the printer is in the
test mode.
Switch 1 on limits the width of the test printout to
80 characters. If switch 1· is off, the test printout
width is 132 characters.
Switch 2 on runs the forms emitter test. This test
causes the platen to turn backward and forward.
As the platen assembly moves, the error indicator
shows the amount of forms emitter adjustment
that is needed.
Function
1
2
80 char.
On
lines
Forms
On
test
4-4
SY34-0613
Model02R
•
•
Switch 1 and switch 2 allow for internal clocking
at data rates of 1200, 2400, and 4800 bps. When
switch 1 and switch 2 are off, the rate is .1200 bps.
When switch 1 is off, the rate is 2400 bps. When
switch 2 is off, the rate is 4800 bps. When both
switchs 1 and 2 are on the rate is selected by the
system.
Switch 3 on limits the. width of the test printout to
80 characters. If switch 3 is off, the. test printout
width is 132 characters.
•
Switch 4 on rqns the forms emitter test. This test
causes the platen to tum backward and forward.
As the platen assembly moves, the error indicator
shows the amount of forms emitter adjustment
that is needed.
Function
1
2
3
4
~O
char.
On
lines
Forms
On
test
1200 bps
Off
Off
2400 bps
Off
On
4800 bps
On
Off
External
On
On
clock
Advertisement
Table of Contents
