Set Up Dexcom One+ With Patient; Check Patient Reports In Clarity; End Of Sensor Session; Next Steps - Dexcom ONE+ User Manual

Set up Dexcom ONE+ with patient

With your patient, follow the setup instructions in Start Here to set up the app or receiver.
You'll need the pairing code. Find it on the applicator:
While setting up Dexcom ONE+ with your patient, you will create a personalized glucose zone by setting Low and High alerts
appropriate for their A1C.
During sensor warmup, use the table below to explain how to interpret the information on Dexcom ONE+.
Explain
Introduce display screens
What are alerts
Managing diabetes with Dexcom ONE+
Dexcom Clarity app

Check patient reports in Clarity

For patients using the app, at any time during the sensor session, you can go to
data. For patients using only the receiver, that data is available after they return the receiver and you upload the data at
dexcom.com/clarityapp.

End of sensor session

At the end of the sensor session, remove Dexcom ONE+ from the patient. Go to the Remove your sensor section of the
sensor session chapter for more information.

Next steps

Your patient may want to have their own Dexcom ONE+. It's available for personal use. Direct them to
information.
After cleaning, disinfecting, and resetting the receiver, you're ready to use Dexcom ONE+ on another patient and introduce
them to its benefits.
Show
Display device screens
Alerts
Treatment decisions
Let your patients who use the app know about Clarity's trends,
statistics, and patterns. Go to
dexcom.com/clarityapp
Have patients download the Clarity app and enter the sharing
authorization code provided by your clinic.
C • Professional use instructions |
chapter
chapter
chapter
Clarity
for more information.
dexcom.com/clarityapp
Dexcom ONE+ User Guide
69
appendix and
to see their glucose
Next
dexcom.com for more