Dexcom ONE+ User Manual page 80

Sensor with built-in transmitter and receiver product specifications
Model
Glucose Range
Useful Life
Sterilization
Memory Storage
Data Backfill for User
Display
Power Source
Battery Longevity (Typical) Sufficient to support 10-day wear
Battery Charging Time
Operational Temperature
Operating and Storage
Humidity
Storage Temperature
Operating and Storage
Altitude
Ingress Protection
Applied Part
Alert Audible Output
TX/RX Frequencies
Bandwidth
Maximum Output Power
Modulation
Data Rate
Data Communication
Range
The maximum surface temperature of Applied part = 43°C.
Dexcom ONE+
sensor/transmitter
2.2–22.2 mmol/L
Up to 10 days
Ethylene Oxide gas
Minimum 24 hours of glucose data
24 hours
Internally/battery powered
period with a 12-hour grace period
Non-rechargeable
Temperature:
10°C–42°C
Humidity:
10%–90% RH
Temperature:
2°C–30°C
Store sensors in a cool, dry place
-382 meters to 5,000 meters
IP58: Protected from ingress of dust;
Protected from submersion in the
water up to depth of 2.4 meters for
24 hours
Type BF applied part
N/A
2.402–2.480 GHz
1.07 MHz
1.0 mW EIRP
Gaussian Frequency-Shift Keying
1 Mbps
6 meters
F • Technical information |
Dexcom receiver
N/A
3 years for typical use
N/A
180 days of glucose data
Internally/battery powered,
rechargeable; AC mains powered
7 days
Approximately 3 hours
Temperature:
0°C–40°C
Humidity:
10%–90% RH
Temperature:
0°C–40°C
-382 meters to 5,000 meters
IP54: Protected from ingress of dust;
Protected from splashing water in any
direction
No applied parts
50dBA at 1 meter
1.39 MHz
7.4 mW EIRP
Dexcom ONE+ User Guide
75