Selecting Voices From A Midi Keyboard - Yamaha MU100 Owner's Manual

Selecting Voices From a MIDI Keyboard

You can also select Voices remotely from a connected MIDI keyboard.
Though the actual operation may differ depending on the keyboard used, the
general procedure is the same. These instructions also apply to use with a
computer. (Refer to the owner's manual of your specific instrument or soft-
ware for detailed instructions.)
Operation
1 Make the necessary settings on the keyboard.
Make sure that the keyboard is set to transmit over the desired
MIDI channel (the same as that of the selected Part), and that it
is set up to send Program Change messages.
2 Select a program number on the keyboard.
The Voice number and name on the MU100 will change, and
will be the same number as the program number you selected
on your keyboard.
Details
• Depending on what keyboard you are using to control the MU100, you may
need to be careful in selecting program numbers. The MU100's program num-
bers start at "001," but some keyboards have different numbering systems. For
example, some start at "0" — which means that selecting "25" on the keyboard
will select Voice 026 on the MU100.
• Part 10 is reserved for playing drum "kits." This is the default factory setting for
all of the Multi modes (XG, TG300B, and C/M). For more information on drum
Parts, see page 55.
Selecting and Playing Individual Voices
Guided Tour
47