Yamaha MU100 Owner's Manual page 147

Dump Out Functions (DUMPOUT)
Multi
Settings:
This transmits the selected MU100 Multi Part data (including
System, Effect and EQ data) to the connected device. (Use the
VALUE -/+ buttons to select the type/amount of data to be
transmitted.)
Performance (PERFORM)
Settings:
This transmits the selected MU100 Performance data to the
connected device. (Use the VALUE -/+ buttons or data dial to
select the type/amount of data to be transmitted.)
4 From the "Are you sure?" prompt, press the ENTER button to
execute the operation, or press the EXIT button to cancel it and
return to the Dump Out menu.
A "Transmitting..." message appears in the display during the
operation. When the transmission is completed, the MU100 returns
to the Dump Out menu.
NOTE
If you have more than one MU100 connected in your MIDI system and wish to send differ-
ent sets of data to each, you can specify a different Device Number for each. (See page 98.)
You should set the Device Number on each MU100 you use, before dumping the data to a
data storage device. Then, when you reload the data to the connected MU100s, each unit
will automatically receive only the data that has the corresponding Device Number.
150
32 Parts, 16 Parts, 32 Parts + A/D, 16 Parts + A/D
ALL, I 001 — I 100 (Internal Performance numbers)
Utility Mode