Sound Module Mode (Mode) - Yamaha MU50 Owner's Manual

The Demo Song starts playing immediately and repeats indefinitely
until stopped (in step 4 below). Playback of the individual Parts of the
song is shown graphically by the "level meter" bars in the display.
NOTE
During Demo Song playback, no panel controls (with the exception of the EXIT
VOLUME
the VOLUME VOLUME
3 To stop playback of the song, press the EXIT
4 To exit from the Demo Song function, press the EXIT

Sound Module Mode (MODE)

This lets you select the operating mode of the MU50. Press the MODE but-
ton, then use the VALUE w buttons to select the desired Sound Mod-
ule mode: XG (XG MIDI), TG300B (General MIDI), C/M (Computer Mu-
sic), DOC (Disk Orchestra) or PERFORM (Performance). If XG,
TG300B, C/M or DOC are selected, the MU50 automatically sets itself to
the Multi mode. When PERFORM is selected, the MU50 is in the Per-
formance mode. (See page 66.)
The bottom right of the display indicates the currently selected Sound
Module mode.
Press the EXIT button (or any one of the other mode select buttons: PLAY,
EDIT, UTIL or EFFECT) to use the MU50 in the current mode.
NOTE
When the MU50 is not
MU50 changes to the XG mode after a slight pause of 0.5 seconds.
VOLUME
VOLUME control) can be used.
Arrow indicates selected Sound Module mode.
not not
not not set to the XG mode and an XG System On
UTILITY MODE
EXIT EXIT button and EXIT EXIT
EXIT EXIT EXIT button. EXIT
EXIT EXIT
EXIT EXIT button again.
XG System On XG System On
XG System On XG System On message is received, the
105