Single Part Controls - Selecting Different Voices For The Performance - Yamaha MU100 Owner's Manual

Editing in the Performance Mode
Single Part Controls — Selecting Different
In this next section, you'll use the Single Part controls to change the Voice
settings of the Performance.
Operation
1 Call up the Single Part controls.
From the All Part controls, simultaneously press both [PART -/
+] buttons.
Performance bank and number.
PART
For more information on the Single Part controls, see page 121.
2 Select the desired Part.
Use the [PART -/+] buttons.
Keep in mind that you should select only from the active Parts —
the ones with a dark bar in the display. Other Parts can be selected
and changed; however, they will not sound in the Performance.
3 Select the desired bank and Voice.
Do this in the same way as you did in the Multi mode. (See steps
2 and 3 on page 44.)
62
Voices for the Performance
MIDI BANK/PGM# VOL EXP PAN REV CHO VAR KEY
(Not available in Single Part.)
Selected Part number. (Change this with the [PART -/+] buttons.)
Guided Tour
Voice name, bank (Preset or Internal), and program number.
Chorus Send.
Reverb Send.
Part Pan
(stereo position of selected Part).
Expression
(not available; always set to maximum).
Part Volume.
Note Shift
(key transpose
setting for
selected Part).
Variation Send.