Sound Module Mode (Mode) - Yamaha MU80 Owner's Manual

3 To stop playback of the song, press the EXIT button.
4 To exit from the Demo Song function, press the EXIT button
again.

Sound Module Mode (MODE)

This lets you select the operating mode of the MU80. Press the MODE but-
ton, then use the SELECT w buttons to select the desired Sound Mod-
ule mode: XG (Extended General MIDI), TG300B (General MIDI), C/M
(Computer Music) or PFM (Performance). If XG, TG300B or C/M are se-
lected, the MU80 automatically sets itself to the Multi mode. When PFM
is selected, the MU80 is in the Performance mode. (See page 34.)
The bottom right of the display indicates the currently selected Sound
Module mode.
Press the EXIT button (or any one of the other mode select buttons: PLAY,
EDIT, UTIL, EFFECT or EQ) to use the MU80 in the current mode.
NOTE
When the MU80 is not set to the XG mode and an XG System On message is received, the
MU80 changes to the XG mode after a slight pause of 0.5 seconds.
Arrow indicates selected Sound Module mode.
UTILITY MODE
109