Performance Part Control
Performance Part Control
All Part
For basic information on using the All Part controls in the Performance mode, see page
60.
System MIDI Channel (Sys CH)
Settings:
01 — 16
This determines the MIDI receive chan-
nel for all Parts of the Performance.
Performance Bank
Settings:
Pre (Preset), Int (Internal)
This determines the bank of Performance
programs: Preset or Internal. Preset Perfor-
mances are those that have been created and
loaded at the factory; the Internal bank is
reserved for user-created Performances.
NOTE
When changing Performance banks, there may
be a slight delay before the sound changes.
Performance Number
Range:
001 — 100
This determines the Performance number.
NOTE
When changing Performance numbers, there
may be a slight delay before the sound changes.
120
Performance Volume (Pfm Vol)
Range:
This determines the overall Volume of the
Performance.
Performance Pan (Pfm Pan)
Range:
This determines the overall Pan position
of the Performance.
Reverb Return (RevRtn)
Range:
This determines the amount of Reverb
return for the Performance in the overall
mix.
Performance Mode
000 — 127
L63 — C — R63
000 — 127