Selecting Voice Banks And Voices From The Panel - Yamaha MU100 Owner's Manual

About the Modes — Multi and Performance
The MU100 has two main operating modes: Multi and Performance. You used
the Performance mode earlier when playing Performances — playing four
Voices over one MIDI channel. The Multi mode is primarily used in sequencer
and computer music applications, since it allows you to play all 32 Parts inde-
pendently over different MIDI channels.
mode. The XG, TG300B and C/M settings are all Multi mode. When PFM is
selected, the MU100 is in the Performance mode.

Selecting Voice Banks and Voices From the Panel

Operation
1 Select a Part.
Use the [PART -/+] buttons. Depending on the selected Part,
one of the displays below will appear:
• For Parts 1 – 16 and the A/D Parts:
• For Parts 17 – 32:
For this example, select Part 1. Press the appropriate button until
"01" appears in the PART section of the display.
Which mode the MU100 is set to depends on the selected Sound Module
Guided Tour
Selecting and Playing Individual Voices
43