SitOnit Seating Surge C-Leg Assembly Instructions Manual page 6

Surge
ASSEMBLY INSTRUCTIONS
WARNING
RISK OF DEATH AND SERIOUS INJURY
Do Not Overload Table
Make sure the table system is not overloaded by the weight of the tabletop and
objects on table. Evenly distribute load; excess loads near the edges can reduce
stability and lead to tip-over. Do not exceed maximum load of 265 lb.
Assemble With Care
Failure to follow instructions could result in product failure or potential injury. Keep
fingers clear of pinch points
Use Care to Keep the Table From Tipping Over
Before moving the table system, clear all objects and equipment from the table to
reduce the risk of tipping over. Do not lift the table system by the tabletop. Adjust the
table to its lowest height before moving. In order to avoid risk of tipping or collapse,
make sure corded objects will not
be pulled off the table or cause
1"
other objects to fall.
1"
1"
1"
Clearance Around
the Table
1"
Confirm that the surroundings on
all sides of the table system are
1"
clear and make sure the power
1"
cord moves freely as desk moves
up and down.
If the tabletop encounters
resistance while moving, it
will rebound.
1"
| |
6
C6772 Rev B www.sitonit.net