SitOnit Seating Surge C-Leg Assembly Instructions Manual page 26

Surge
SETUP INSTRUCTIONS
Synchronize the Height
Display
This feature allows user to recalibrate
the height display so it matches the
measured table height
1. Press and hold
and hold the ∆ button. Hold in both
buttons until the display blinks.
2. Press the ∆ or ∇ buttons to change
the number to the desired number.
3. Repeat the above sequence to adjust
each digit.
S
4. Press the button to apply
the settings.
Set the Minimum Height
1. Press and hold the ∇ button until it
reaches the desired position.
2. Press and hold the
press and hold the
for at least 3 seconds.
3. The letter
- L -
screen indicating that the position is
now "locked."
S
4. Press the button until the screen
readout returns to the digital
height reading.
|
26
C6772 Rev B
S
. Then quickly press
S
button, then
1
button. Do this
will appear on the
|
www.sitonit.net
Set the Maximum Height
1. Press and hold the ∆ button until it
reaches the desired position.
2. Press and hold the
press and hold the
for at least 3 seconds.
- L -
3. The letter
screen indicating that the position is
now "locked."
S
4. Press the button until the screen
readout returns to the digital
height reading.
To Clear Minimum and
Maximum Height Settings
1. Press and hold the
press and hold the
for at least 3 seconds.
2. The letter will appear on the screen
C
indicating the positions are clear.
S
button, then
3
button. Do this
will appear on the
S
button, then
2
button. Do this