Table of Contents
Advertisement
5. Maintenance
Product Maintenance
Dust build-up reduces light output performance and can cause overheating. This can lead to reduction of
the light source's life and/or mechanical wear. To maintain optimum performance and minimize wear, clean
all lighting products at least twice a month. However, be aware that usage and environmental conditions
could be contributing factors to increase the cleaning frequency.
To clean the product, follow the instructions below:
1. Unplug the product from power.
2. Wait until the product is at room temperature.
3. Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on the external
surface/vents.
4. Apply a solution of ammonia-free glass cleaner or isopropyl alcohol directly to a soft, lint free
cotton cloth or a lens cleaning tissue.
5. Use the cloth or tissue to clean all transparent surfaces.
6. Softly drag any dirt or grime to the outside of the transparent surface.
7. Gently polish the transparent surfaces until they are free of haze and lint.
Always dry the transparent surfaces carefully after cleaning them.
47
LΩGIC Wall Panel 16- Port User Manual Rev. 1
Maintenance
Advertisement
Table of Contents
