Table of Contents
Advertisement
Erase Recording
To erase a recording slot:
1. Go to the Record main menu.
2. Select the Record Erase option.
3. Select the desired recording slot, from Record1–8 Clr.
4. Select from No (cancel) or Yes (erase the selected recording slot).
System Clock
The system clock functions allow the LΩGIC Wall Panel 16- Port to place itself in or out of Shut off mode
on a set schedule. While in Shut off mode:
•
The LΩGIC Wall Panel 16- Port will black out all connected LΩGIC products.
•
The LΩGIC Wall Panel 16- Port will function at minimum power consumption.
•
All settings other than the System Clock settings will be inaccessible.
Setting Clock
Before setting the schedule, ensure the internal clock and calendar is set correctly:
1. Go to the System Clock main menu.
2. Select the Setting Clock option.
3. Review the current settings. If they are inaccurate, press the <MENU> knob to begin setting the
clock. After setting each option, press the <MENU> knob to move to the next option.
4. Set the month of the current date, from 01–12 (January to December).
5. Set the day of the month, from 01–31.
6. Set the year, from 2000–2099.
7. Set the hour of the day, from 00–23 (in a 24-hour clock, 00 is midnight and 13 is 1 PM).
8. Set the minute of the hour, from 00–59.
9. Set the second of the minute, from 00–59.
10. Set the day of the week, from 1–7 (Monday to Sunday).
11. Press <ESC/BACK> to exit.
Schedule
The LΩGIC Wall Panel 16- Port can be scheduled by the time of day (Everyday), from one date to another
(By date), and by the day of the week (By week) all at the same time.
•
Selecting the Everyday, By date, or By week options not only enters the sub-menu for the
selected option but also automatically enables it.
•
To disable the option, select it again from the Schedule menu.
•
To alter one of these settings, it must be disabled and then reselected.
Everyday
To set the daily schedule:
1. Go to the System Clock main menu.
2. Select the Schedule option.
3. Select the Everyday option.
4. Review the current settings. To begin editing them, press the <MENU> knob. After setting each
option, press the <MENU> knob to move to the next option.
5. Set the Turn on hour, from 00–23 (in a 24-hour clock, 00 is midnight and 13 is 1 PM).
6. Set the Turn on minute, from 00–59.
7. Set the Turn on second, from 00–59.
8. Set the Turn off hour, from 00–23.
9. Set the Turn off minute, from 00–59.
10. Set the Turn off second, from 00–59.
11. Select Enable to turn on.
12. Press <ESC/BACK> to exit.
41
LΩGIC Wall Panel 16- Port User Manual Rev. 1
Operation
Advertisement
Table of Contents
