Setup
Step 4
1. Identify the ribbon cable port on the master control board which corresponds with the Expand Kit
slot.
2. Open the applicable ribbon cable ports on the 8-port POE output board and on the master control
board.
First Expand Kit
ribbon cable port
Second Expand Kit
ribbon cable port
Second Expand Kit
8-port POE
output board
First Expand Kit
8-port POE
output board
3. Insert the ribbon cable into the corresponding ports in such a way that when viewing the circuit
boards with the access panel open the blue tips are visible. Then close the ribbon ports.
LΩGIC Wall Panel 16- Port User Manual Rev. 1
22