Table of Contents
Advertisement
Setup
Mounting
Before mounting the product, read and follow the safety recommendations indicated in the
Orientation
Always mount this product in a safe position, making sure there is adequate room for ventilation,
configuration, and maintenance.
Rigging
Chauvet recommends using the following general guidelines when mounting this product.
•
Before deciding on a location for the product, make sure there is easy access to the product for
maintenance.
•
Make sure the structure and attachment points can support the weight before hanging the product
(See the
Technical
Wall Mounting
The LΩGIC Wall Panel 16- Port has 4 rack ears on the top and bottom for hanging on a wall or securing to
a surface. The LΩGIC Wall Panel 16- Port fits on a standard 20U rack mount.
Rack mounting
To mount the product using a rack mount:
1. Identify the ideal point of installation in the room.
2. Ensure that the rack is stable before attempting to mount.
3. Mount the LΩGIC Wall Panel 16- Port to the rack using the applicable hardware.
Panel Installation
To install the LΩGIC Wall Panel 16- Port inside a rack mount:
1. If applicable, move the rack ears to the front of the product using a screwdriver.
Rack ears must be front-facing for proper rack mount installation.
2. Remove necessary knockouts.
For further information on how to remove knockouts, see Knockouts.
LΩGIC Wall Panel 16- Port User Manual Rev. 1
Specifications).
Safety
Notes.
14
Advertisement
Table of Contents
