White (1 Channel); Blue (1 Channel); Green (1 Channel); Red (1 Channel) - Iluminarc LOGIC User Manual

WHITE (1 Channel)

Channel Function
1 Dimmer

BLUE (1 Channel)

Channel Function
1 Dimmer

GREEN (1 Channel)

Channel Function
1 Dimmer

RED (1 Channel)

Channel Function
1 Dimmer

Static

To take temporary manual control of all connected LΩGIC products, custom mix a color, and assign a
strobe speed:
1. Go to the Static main menu.
2. Select which value to alter, from Red, Green, Blue, White, or Strobe.
3. Set the selected value, from 000–255.
For Strobe, reference the following table:
000  009 No function
010  099 Strobe, 0–25 Hz
100  109 No function
110  179 Lightning strobe, slow to fast
180  189 No function
190  255 Random strobe, slow to fast
4. Press the <MENU> knob to cycle to the next value.
5. Repeat steps 3-4 until the products output as desired.
6. Press <ESC/BACK> to finish.
39
Value
000  255 White only, 0–100%
Value
000  255 Blue only, 0–100%
Value
000  255 Green only, 0–100%
Value
000  255 Red only, 0–100%
Value Percent/Setting
Percent/Setting
Percent/Setting
Percent/Setting
Percent/Setting
LΩGIC Wall Panel 16- Port User Manual Rev. 1
Operation