Table of Contents
Advertisement
Operation
Linked Fixture
Use control configurations to operate the connected LΩGIC products with a DMX, Art-Net™, or sACN
controller.
Linked LΩGIC Product Menu Map
To access the menu map for a connected LΩGIC product:
1. Go to the Linked Fixture main menu.
2. Select Status.
3. Select the output to which the desired LΩGIC product is connected, from Output 1-32.
4. Select the desired LΩGIC product. The selected product will flash its LEDs for the duration it is
being accessed.
Refer to the LΩGIC Wall Panel 16- Port product page and the product page for the selected
LΩGIC product on
www.iluminarc.com
Main Level
Dmx Address
Personality
Net Switch
Network
Universe
Version
IP Address
Fixture Hours
Information
Label
Device UID
MAC Address
Temperature
Factory
Reset
LΩGIC Wall Panel 16- Port User Manual Rev. 1
for the latest menu maps and software.
Programming Levels
001–512
RED
GREEN
BLUE
WHITE
TW
RGB
RGBW
RGBW+D
FULL
2.X.X.X
10.X.X.X
000–255 / 001–256
(Art-Net™)
(sACN)
V _._ _
_ _ _._ _ _._ _ _._ _ _
_ hours
_ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _-_ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _._ °C
No
Yes
Description
Selects DMX address
1-channel: dimmer (red only)
1-channel: dimmer (green only)
1-channel: dimmer (blue only)
1-channel: dimmer (white only)
2-channel, Tunable White: dimmer, color
temperature
3-channel: RGB control
4-channel: RGBW control
5-channel: dimmer, RGBW control
10-channel: dimmer, RGBW control, color
temperature, strobe, auto programs and
speed, dimmer speed
Selects the first value of the IP address
Selects universe
Shows current firmware version
Shows the IP address
Shows length of time product has been on
Shows product label
Shows device UID
Shows the MAC address
Shows the current temperature in °C
Resets to factory default settings
34
Advertisement
Table of Contents
