Step 6 - Iluminarc LOGIC User Manual

Setup

Step 6

1. Use a #2 Phillips-head screwdriver to loosen the left-most rail clamp and slide it off the rail.
2. Slide the Expand Kit DIN rail breaker onto the rail until it is up against the adjacent DIN rail
breaker.
3. Slide the rail clamp back onto the rail until it is up against the Expand Kit DIN rail breaker.
4. Use a #2 Phillips-head screwdriver to tighten the rail clamp.
5. Use a #2 Phillips-head screwdriver to install the power cables to the DIN rail breaker, with the
white cables on the right and the black cables on the left.
First Expand Kit
DIN rail breaker
Second Expand Kit
DIN rail breaker
LΩGIC Wall Panel 16- Port User Manual Rev. 1 24