Table of Contents
Advertisement
Operation
By date
To set specific dates to turn on and off:
1. Go to the System Clock main menu.
2. Select the Schedule option.
3. Select the By date option.
4. Review the current settings. To begin editing them, press the <MENU> knob. After setting each
option, press the <MENU> knob to move to the next option.
5. Set the Turn on Month, from 01–12 (January to December).
6. Set the Turn on Day, from 01–31.
7. Set the Turn on Year, from 2000–2099.
8. Set the Turn off Month, from 01–12.
9. Set the Turn off Day, from 01–31.
10. Set the Turn off Year, from 2000–2099.
11. Press <ESC/BACK> to exit.
By week
To set which days of the week to turn on:
1. Go to the System Clock main menu.
2. Select the Schedule option.
3. Select the By week option.
4. Review the current settings. To begin editing them, press the <MENU> knob.
5. Select each desired day, from Sun, Mon, Tues, Wed, Thur, Fri, and/or Sat.
6. Select any selected day again to deselect it.
7. Press <ESC/BACK> to finish, and then again to exit.
Enable Clock
To enable or disable the system clock functions:
1. Go to the System Clock main menu.
2. Select the Enable Clock option.
3. Select from No (disable) or Yes (enable).
Fade In and Fade Out
To set whether the lights will turn on or off instantly when entering or leaving Shut off mode, or whether
they will fade in or out:
1. Go to the System Clock main menu.
2. Select which option to set, from Fade In or Fade Out.
3. For Fade In, select from OFF or ON.
4. For Fade Out, select from OFF or ON.
LΩGIC Wall Panel 16- Port User Manual Rev. 1
42
Advertisement
Table of Contents
