Control; Device Control; Device Functions - Salda RIS 700 H EKO 3.0 Mounting And Installation Instruction

7. CONTROL

7.1.

DEVICE CONTROL

Ventilation unit equipped with PRV control board can be controlled with remote controller, WEB interface or mobile app via MB-GATEWAY and
BMS (building management system). More information provided in the table below.
With MB-GATEWAY
Web interface
SALDA AIR mobile application
BMS over Modbus TCP/IP
BMS over BACnet TCP/IP
7.2.

DEVICE FUNCTIONS

PRV control board operation functions and control of the device depends on the following:
1. Selected control interface (remote control panel, MB-GATEWAY, etc.). The selected interface affects access to the information and settings,
however, it does not affect the logic of control. Full access to the information and settings is available on FLEX, ST-SA-Control, MB-GATEWAY
WEB application and SALDA AIR mobile application.
2. Unit configuration (internal/external components, sensors and control board settings).
Refer to the instruction manual of the existing control device for unit control instructions.
16 | EN
Remote control panels
Stouch
ST-SA-Control
FLEX
BMS direct connection
Modbus RTU (RS485)
Wireless communication
MB-GATEWAY + WIFI router
RIS 700 H EKO 3.0 v2023.1