Declaration Of Conformity - Salda RIS 700 H EKO 3.0 Mounting And Installation Instruction

11. DECLARATION OF CONFORMITY

Manufacturer
SALDA, UAB
Ragainės g. 100
LT-78109 Šiauliai, Lithuania
Tel.: +370 41 540415
www.salda.lt
Hereby confi rms that the following products - Air handling units:
RIS * EKO 3.0
(where by „*" indicates possible unit installation type and modifi cation)
Provided it was delivered and installed in the facility in accordance with the included installation instructions, comply with all applicable requirements
in the following directives:
Machinery Directive 2006/42/EC
EMC Directive 2014/30/EU
Low Voltage Directive 2014/35/EU
Ecodesign Directive 2009/125/EC
RoHS 2 Directive 2011/65/EU
The following regulations are applied in applicable parts:
Ecodesign requirements for ventilation units Nr. 1253/2014
Energy labelling of residential units Nr. 1254/2014
The following harmonized standards are applied in applicable parts:
LST EN 13141-7:2011 - Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 7: Performance
testing of a mechanical supply and exhaust ventilation units (including heat recovery) for mechanical ventilation systems intended for single family
dwellings.
LST EN ISO 12100:2011 - Safety of machinery - General principles for design - Risk assessment and risk reduction.
LST EN 60204-1:2018 - Safety of machinery - Electrical equipment of machines - Part 1: General requirements.
LST EN 60335-1:2012 - Household and similar electrical appliances. Safety. Part 1: General requirements.
LST EN 60529:1999/A2:2014/AC:2019 - Degrees of protection provided by enclosures (IP code).
LST EN 61000-6-1:2007 - Electromagnetic compatibility (EMC). Part 6-1: Generic standards - Immunity for residential, commercial and light-
industrial environments.
LST EN 61000-6-4:2007/A11:2011 - Electromagnetic compatibility (EMC). Part 6-4: Generic standards - Emission standard for industrial
environments.
Should any alterations be made in the products, this declaration will no longer apply.
Quality: SALDA UAB activities are in line with the international quality management system standard ISO 9001:2015.
Date 2022-05-17
Giedrius Taujenis
Product Manager
24 | EN RIS 700 H EKO 3.0 v2023.1