Table of Contents
Advertisement
Installation Guide
1 General Information
1.1 Introduction
This manual describes the assembly, installation, maintenance, transport and storage of MagSpring
products.
The document is intended for electricians, fitters, service technicians and storage personnel. Read this
manual before handling the product and observe the general safety instructions and those in the relevant
section at all times.
Keep these operating instructions accessible and make them available to the authorised personnel.
1.2 Explanation of symbols
Triangular warning signs warn of a hazard.
The round commandment sign is used to prescribe certain behaviour.
1.3 Qualified Personnel
All work such as installation, commissioning, operation and service of the product may only be carried out by
qualified personnel.
The personnel must have the required qualification for the corresponding activity and be familiar with the
installation, commissioning, operation and service of the product. For this purpose, the manual and
especially the safety instructions must be carefully read, understood and observed.
1.4 Liability
NTI AG (as manufacturer of LinMot and MagSpring products) excludes any liability for itself and its
employees for damages and expenses caused by incorrect use of the products. This also applies to incorrect
applications caused by NTI AG's own information and instructions, for example in the course of sales,
support or application activities. It is the responsibility of the user to check the information and instructions
provided by NTI AG for their safety-related correct applicability. Furthermore, the entire responsibility for the
safety-related correct product functionality lies exclusively with the user. Likewise, any warranty claim is void
when used or in combination with third-party products such as stators, sliders, servo drives and cables. With
your purchase, you confirm that you have read and understood the warnings listed in the assembly
instructions.
Please also refer to our General Terms and Conditions.
1.5 Copyright
This work is protected by copyright.
All rights, including those of translation, reprinting and reproduction of the manual or parts thereof, are
reserved. No part of this work may be reproduced in any form (photocopy, microfilm or any other process) or
processed, duplicated or distributed using electronic systems without the written permission of NTI AG, not
even for the purpose of teaching.
LinMot® and MagSpring® are registered trademarks of NTI AG.
Page 4 / 25
MagSpring
MS01
ENG
NTI AG / LinMot
Advertisement
Table of Contents
