Table of Contents
Advertisement
Installation Guide
The following figure illustrates the entire movement process of the MagSpring:
•
The zero position (ZP) is the point at which the slider is in stable equilibrium.
•
The knitting lines show the areas of increasing or decreasing restoring force.
•
The constant force start position (SP) indicates the start of the constant force range (measured 35
mm (1.38 in) from the four-edged working end of the slider to the end of the stator).
Page 12 / 25
MagSpring
MS01
ENG
NTI AG / LinMot
Advertisement
Table of Contents
