Table of Contents
Advertisement
Installation Guide
4.11 Minimum distances for MagSpring sliders
In order to prevent undesirable and dangerous force developments, minimum distances
between MagSpring sliders and other magnetic components must be taken into account in
the design. The latter include permanent magnetic parts, such as other MagSpring sliders
and LinMot sliders or ferromagnetic elements made of iron or steel.
4.11.1 Minimum distances to ferromagnetic parts
Minimum distance "d" from the MagSpring axis to ferromagnetic parts
MagSpring slider type
ML01-12x130/80...
ML01-12x210/160...
ML01-12x290/240...
ML01-12x370/320...
Page 18 / 25
MagSpring
... -10
20 mm (0.79 in)
26 mm (1.06 in)
30 mm (1.18 in)
32 mm (1.26 in)
MS01
... -15
23 mm (0.90 in)
30 mm (1.18 in)
34 mm (1.34 in)
37 mm (1.46 in)
ENG
... -20
26 mm (1.02 in)
33 mm (1.30 in)
36 mm (1.42 in)
40 mm (1.57 in)
NTI AG / LinMot
Advertisement
Table of Contents
