Regeneration Of Power / Regeneration Resistor; Ordering Information - LinMot E1200 Installation Manual

LinMot Installation Guide

10 Regeneration of Power / Regeneration Resistor

There are two possibilities to deal with power regeneration:
Option A: Connect an additional capacitor to the motor power supply. It is
recommended to use a capacitor >= 10'000 µF
(install capacitor close to the power supply!)
Option B: Install a regeneration resistor to X1 (RR+ and RR-). The threshold
value of the voltage depends on the used motor voltage power supply.
The max. threshold value must not exceed 88 VDC.
Item
Capacitor
Regeneration Resistor
Regeneration Resistor

11 Ordering Information

Item Description
E1250-PL-UC POWERLINK Servo Drive
E1250-PN-UC PROFINET Servo Drive
E1250-PD-UC ProfiDrive Servo Drive
E1250-EC-UC EtherCAT Servo Drive
E1250-SE-UC sercos over EtherCAT Servo Drive
E1250-DS-UC EtherCAT CoE Servo Drive
E1250-SC-UC sercos Servo Drive
E1250-IP-UC ETHERNET IP Servo Drive
E1250-LU-UC LinUDP Servo Drive
E1230-DP-UC PROFIBUS-DP Servo Drive
E1200-GP-UC GENERAL PURPOSE Servo Drive
Accessories Description
Isolated USB- Isolated USB RS232 converter with config. cable
RS232 converter
Connector for X4 Connector MC 1,5/12-STF-3,5, delivered with drive
RS232 PC config. For C1100/C1250/E1200/E1400/M8000
Cable 2.5m
Isolated USB-serial Isolated USB RS232/422/485 converter
converter
NTI AG / LinMot ®
Description
Capacitor 10'000 F / 100 V
R01-10/60 (10 Ohm, 60 W)
RR01-10/150 (10 Ohm, 150 W)
www.LinMot.com
72VDC/32A
72VDC/32A
72VDC/32A
72VDC/32A
72VDC/32A
72VDC/32A
72VDC/32A
72VDC/32A
72VDC/32A
72VDC/32A
72VDC/32A
Art. No.
0150-3075
0150-3088
0150-3090
Art. No.
0150-1760
0150-1762
0150-2620
0150-1763
0150-1898
0150-2410
0150-1764
0150-1761
0150-2493
0150-1766
0150-1771
Art. No.
0150-2473
0150-3300
0150-2143
0150-3120
Page 18/22