Table of Contents
Advertisement
Installation Guide
3 Intended Use
3.1 Functional principle of the MagSpring magnetic springs
The mode of operation is based on the attractive force of permanent magnets. Accordingly, no energy supply
(electricity, compressed air, etc.) is necessary. Depending on the strength class of the MagSpring, the
permanent magnets are located in the slider and partly in the stator. The slider is supported by an integrated
sliding guide so that the MagSpring can be used in a similar way to gas springs.
Mounting the MagSpring
"forward" results in a
retracting movement
3.2 General fields of application of MagSpring magnetic springs
The MagSpring magnetic springs have the following functions (e.g. together with H-guides):
•
Relief of the linear motors from constant forces, especially in vertical arrangements, which means
that linear motors can be dimensioned smaller.
•
Restoring force against a defined rest position when the machine is switched off or in the event of a
power interruption.
•
Efficient element for load compensation in vertical applications, without the need for compressed air
or energy through electricity.
•
Application of a basic force (working point force) in the resting position.
NTI AG / LinMot
MagSpring
MS01
Mounting the MagSpring
"backwards" results in an
ejection movement
ENG
Page 7 / 25
Advertisement
Table of Contents
