Generator _Levei_Programmed; Generator _Output - BRUEL & KJAER 1050 Instruction Manual

5.4.32. Generator _Levei_Programmed?
Enables read out of the programmed generator level.
Example of Use:
Generator _Levei_Programmed?
enables read out of, e.g.:
G_L_P -047. 5dB
Notes:
See section 5.4.31.
- If set using example in section 5.4.31
5.4.33. Generator _Output
Switches on/off the Generator Output as in the front panel Generator Output "Stand-
by", "Operate -20dB" and "Operate" functions.
Example of Use:
Generator _Output Stand_By
or
Generator _Output OPerate
or
Generator _Output OPerate-20dB
Notes:
As with manual operation, switching between "Operate" and "Operate -20dB" must be
done via "Stand-by".
5.4.34. Generator _Output?
50
Enables read out of the Generator Output status.
Example of Use:
Generator _Output?
enables read out of:
G_O S_B
or
G_O Op-20
or
G_O Op
- When in "Stand-by"
- When in "Operate -20dB"
- When in "Operate"