Sweep_Limits; Sweep_Rate - BRUEL & KJAER 1050 Instruction Manual

Example of Use:
Sweep_ Count?
enables read out of, e.g.:
s_c 1234, o123
s_c Con , 0012
- For a sweep count of 1234 and 123 elapsed
sweeps
- For continuous and 12 elapsed sweeps
5.4.66. Sweep_Limits
Sets the lower and upper frequency sweep limits as in the front panel Sweep "Limits"
function.
Example of Use:
Sweep_Limits 20 , 5000
or
Sweep_Limits 20 , 5kHz
Notes:
- Sets the lower and upper frequency sweep limits
to 20 Hz and 5000 Hz respectively
The lower limit is a minumum of 1 Hz and the upper limit a maximum of 10000 Hz and the
minimum difference between upper and lower limits is 0,3 Hz.
See Notes in section 5.4.16.
5.4.67. Sweep_Limits?
Enables read out of the lower and upper frequency sweep limits.
Example of Use:
Sweep_Limits?
enables read out of, e.g.:
S_L 0020 . OOOHz , 5000 . OOOHz - If set using the example in section 5.4.66
Notes:
See Notes in section 5.4.16.
5.4.68. Sweep_Rate
Sets the sweep rate parameters as in the front panel Sweep "Rate" function.
Example of Use:
Sweep_Rate LOgarithmic , 1 . 25 - Sets the sweep rate to 1 ,25 oct/min.
Sweep_Rate Linear, 4. 17 - Sets the sweep rate to 4,17 Hz/s.
62