Optionai_Parameter; Output_Header - BRUEL & KJAER 1050 Instruction Manual

5.4.47. Optionai_Parameter
Enables selection of ten different parameters which correspond to Special Functions 16
to 25.
Example of Use:
Optionai_Parameter (Parameter no.) , (Parameter value) - General Syntax,
see Notes
OptionaLParameter
4 ,
3
Notes:
- Sets optional parameter 4 (Special Function 19)
to 3
The 'Parameter no.' will be 1 to 1 0 corresponding to Special Function 16 to 25 respec-
tively. The 'Parameter value' will be 0 to 9.
5.4.48. Optionai_Parameter?
Enables read out of the optional parameter values.
Example of Use:
Optionai_Parameter? (Parameter no. )
enables read out of:
O_P (Parameter no.) , (Parameter value)
- General Syntax, see Notes
- General Syntax, see Notes
Optionai_Parameter? 3
O_P 3, 4
- Enables read out for parameter 3 of, e.g.:
- If value is set to 4
Notes:
The 'Parameter no.' will be 1 to 10 corresponding to Special Function 16 to 25 respec-
tively. The 'Parameter value' will be 0 to 9.
5.4.49. Output_Header
54
Specifies whether or not the Message header accompanies the data read out of the
1050.
Example of Use:
Output_Header Included - Default - Message header accompanies data
or
Output_Header EXcluded - No Message header with data