Charge_Sensitivity_Correction; Compressor; Compressor _Cross_ Over - BRUEL & KJAER 1050 Instruction Manual

5.4.2. Charge_ Sensitivity _Correction
Applies a percentage correction for the input sensitivity when measuring charge as in
the front panel Vibration Meter "Input Sens." function when the rear panel Input Sensi-
tivity switch is set to pC/Unit.
Example of Use:
Charge_Sensitivity_Correction 3 - Sets a charge sensitivity correction of +3%
Notes:
The selectable percentage values are integer numbers from -8 to +5.
5.4.3. Charge_ Sensitivity _Correction?
Enables read out of the charge sensitivity correction percentage value.
Example of Use:
C harge_Sensitivity _Correction?
enables read out of, e.g.:
c_s_c
-6%
- For a -6% correction
5.4.4. Compressor
Switches the compressor on or off as in the front panel Compressor "On/Off" function.
Example of Use:
Compressor ON - Switches the compressor on
or
Compressor OFf
- Switches the compressor off
5.4.5. Compressor?
Enables read out of the Compressor on/ off status.
Example of Use:
Compressor?
enables read out of:
C
On
or
C Off
5.4.6. Compressor _Cross_ Over _Safety
42
Activates/deactivates the compressor cross over safety feature as in Special Function
28.