Mitsubishi Electric MELFA CR800 Series Instruction Manual page 52

4 SAFETY MONITORING FUNCTIONS
(c) Safety monitoring plane
Selecting [Display monitoring plane] in Properties and setting the items of 1 through 8 to True displays the
selected safety monitoring planes 1 to 8 in the 3D Monitor screen.
(d) Safety monitoring area
Selecting [Display monitoring area] in Properties and setting the items of 1 through 8 to True displays the
selected safety monitoring areas 1 to 8 in the 3D Monitor screen.
4-42 Defining 3D Models
Fig. 4-12: Safety monitoring plane
Fig. 4-13: Safety monitoring area