Table of Contents
Advertisement
PRIOR TO INSTALLATION
1. Measure cavity dimensions.
Ensure all minimum
specifications have been met
and clearances have been
considered.
Check ventilation requirements
for LP cylinder storage cabinet
enclosures on page 9, and
in the Planning Guide.
2. Ensure ground is level and
clear.
3. Ensure services are
accessible and correctly
installed. Cabinetry should
allow access to gas and power
cables below the grill once
installed. Refer to the Planning
Guide for specifications.
dcsappliances.com/us/trade-resources/specify
14
Advertisement
Table of Contents
