Table of Contents
Advertisement
BURNER AIR INTAKE ADJUSTMENT
1. Turn off gas supply and
ensure the burners are cool to
touch.
Grip the burner and use a
screwdriver to open the tab
underneath. Lift the burner out
and remove.
2. Using a Phillips screwdriver,
loosen the burner shutter screw
and turn shutter to desired
position.
Turning clockwise restricts
airflow. Turning counter-
clockwise allows more airflow.
3. Refit the burner ensuring it
is level and located correctly
in the rear mount. Tighten the
shutter screw before lighting.
Light the burner to recheck
flames.
Burners must be properly
located to ensure safe
operation.
32
Advertisement
Table of Contents
