DCS BH1-48RI Installation Manual page 33

Each burner is tested and adjusted before shipping. It should not be necessary to make
adjustments, however local gas variations and altitude may effect burner performance at
low setting.
BURNER LOW FLAME ADJUSTMENT
1. Light the burners before
turning the dial to LOW. Pull
dial to remove from the grill.
2. Hold the control valve shaft
using pliers and insert a long
thin flat screwdriver.
Rotate clockwise to lower, and
counter-clockwise to increase
flame.
3. Refit dial ensuring it is in the
LOW position. Do not force.
33