Screen Mounting; Shorting The Length Of Jib - PROAIM Kite-22 Assembly Manual

Screen Mounting

•
Remove the Base-100 and mount the Screen
(Not Included).
•
After mounting the screen use a screwdriver
(Not Included) to tighten its bolt.
•
Loosen or tighten the bolt using a 4mm Allen
key to adjust the positioning of the screen.

Shorting the Length of Jib

•
To shorten the length of the Kite crane
remove the Levelling cable from the Shank of
the Hub section.
•
Remove both locking pins from the 1st
Section.
•
Loosen and remove the knob of the shank
using a 4mm T-Type Allen key.
24