Battery Mounting - PROAIM CINEMA JB-SCSR-02 Assembly Manual

Weight Mounting
•
Insert the weight into the weight rod.
NOTE: Weight will be added according to the
setup required to balance the camera properly.
•
Insert the weight closer and press its lever to
secure it.

Battery Mounting

•
Now mount your
(Not Included) onto the Battery Plate.
NOTE: The system is integrated with a V-Mount
Battery Plate, which adapts a 14.8V V -Mount
battery to power the drive system.
•
After attaching the v-mount battery, you can
operate the scissor jib in 2 alternate ways.
1. If you press the button to the battery side, it
will be operated by the scissor jib battery.
2. If you press it from the power side, it will run
on the power.
LCD Monitor Arm Mounting
• Connect the Monitor Arm to the Hub
Mounting of the jib and tighten it using the
provided screws.
FEATURE: The LCD Mounting Arm can be
mounted on either side of the hub mounting
allowing you to attach your LCD monitor for
better viewing of shots.
V-Mount Battery
9