Cable & XLR Cable Assembly
•
Connect the female end of the Pan-tilt cable
to the male end of the XLR cable.
•
Attach the cable's female end to the Joystick
controller.
•
Attach the AC Adapter's female end to the
Joystick controller.
AC Adapter & Universal Adapter Assembly
CAUTION:
•
Do not use an unregulated power supply.
•
The regulated power supply must produce less than 24 volts.
•
We do not recommended for 24 volts or above as it may cause permanent damage.
•
Attach the Power cable's one end to the
adapter.
•
Attach the Power cable's other end to the
Universal adapter.
22