•
Tighten the Bolt nut using the 17mm spanner.
•
Repeat the same step to re-insert the second
side Bolt.
Tripod Holders Assembly
•
Remove the Allen bolt from the Tripod holder
using a 3/16" T-Type Allen key and mount the
holder on the Dolly.
•
Carefully align the holes of the Tripod holder
with the Dolly, insert an Allen bolt, and
retighten it using a 3/16" T-Type Allen key.
•
Repeat the same step to mount the
remaining tripod holders.
LW-150 Jib Stand Assembly
•
Stretch out the legs of the LW-150 Jib Stand
and open the Stand.
9