•
Insert two Shaft collars inside the jib and
insert plastic washer in the center of the Jib
and Head platform.
•
Insert plastic washer and steel washer to the
other side of the long bolt.
•
After inserting washer, insert nut and tighten
it using a 21mm spanner.
•
To tighten the bolt, tighten the other side of
the long bolt using the 10mm Allen key and
then tighten the other side using the 21mm
spanner.
•
Now, move both the Shaft collars to the sides
and tighten them using a 3mm T-Type Allen
key.
Turn Buckle Mounting
•
Attach the Turn Buckle to the Hub mounting.
Leveling Cable Assembly
•
Attach one end of the levelling cable to the
Hub mounting.
16