Advertisement
Quick Links
DSLR Filmmaking Kit
( Kit-6-CF)
INSTRUCTION MANUAL
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any
means, electronic, mechanical, photocopying, recording, or otherwise, except as may be expressly permitted
by the applicable copyright statutes or in writing by the publisher.
Advertisement
Related Manuals for PROAIM Kit-6-CF
Summary of Contents for PROAIM Kit-6-CF
- Page 1 DSLR Filmmaking Kit ( Kit-6-CF) INSTRUCTION MANUAL All rights reserved. No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, except as may be expressly permitted...
- Page 2 PROAIM DSLR FILM MAKING KIT 6-CF INTRODUCTION PROAIM DSLR Kit 6-CF is full production ready filmmaking equipment for prosumer operators to increase the quality and efficiency during production. This shoulder mount camera rig is a dynamic piece of equipment that moves with the operator in a wedding shoot, corporate communications, and POP production to produce 'stills' and videos alike.
- Page 3 PROAIM DSLR FILM MAKING KIT 6-CF ASSEMBLING YOUR MB-600 MATTE BOX Insert the French flag (top) to your matte box as shown below and then tighten the knob. Insert the Side flag to your matte box as shown below and then tighten the knob as shown below.
- Page 4 PROAIM DSLR FILM MAKING KIT 6-CF Assembling Your DSLR Filmmaking Kit 6-CF Attach rod support system to your tripod plate and tighten with screw driver. Then mount the setup onto your tripod and secure with provided knob. Loosening the knob and simple push of provided button on quick release adapter allows you to remove quick release plate.
- Page 5 PROAIM DSLR FILM MAKING KIT 6-CF Now insert 2x 300mm female rods into quick release adapter. Now attach 2x 150mm extension rods to rails and tighten the knobs. Loosen the knob on cage bracket in order to insert it to 450mm rails. Using same approach insert another bracket to front of rails and tighten to secure.
- Page 6 PROAIM DSLR FILM MAKING KIT 6-CF Attach top handle to 200mm rods at cage top, retighten the knob to ensure slip free connection. Attach straight bracket to back of rail system and tighten the knob. Then insert 2x200mm rods into it and secure with provided knob.
- Page 7 PROAIM DSLR FILM MAKING KIT 6-CF Attach flexible gear ring to your camera lens and tighten the screw. Now insert X9 follow focus to front of rail system, adjust follow focus with your camera and secure. You can also attach speed crank to fol-...
- Page 8 PROAIM DSLR FILM MAKING KIT 6-CF Now insert MB-600 matte box to front rails, align with lens and secure with the knob as shown below. Attach handle setup to front of rods and tighten the knobs to secure it.
- Page 9 PROAIM DSLR FILM MAKING KIT 6-CF YOUR PROAIM DSLR FILMMAKING KIT 6-CF ALL DRESSED UP AND READY TO GO (SHOWN WITH OPTIONAL ACCESSORIES) Note: If you wish to use your setup with shoulder rig support rod then please use following sequence of text and pictures to assemble your kit.
- Page 10 PROAIM DSLR FILM MAKING KIT 6-CF Attach rod support to waist belt properly. You can adjust the height of your rod support with the help of provided knobs. Attach the rod support to your shoulder rig via 15mm rod adapter .This set up allows you to have fatigue free and long comfy shoots.
-
Page 11: Warranty
PROAIM DSLR FILM MAKING KIT 6-CF WARRANTY We offer a one year warranty for our products from the date of purchase. We will repair or replace your product, free of charge, in the event of a defect in materials or craftsmanship obtained during normal use or handling based on the user manual.