Camera Mounting - PROAIM Kite-22 Assembly Manual

•
Spin-3 Pan-Tilt Head is securely attached to
the mounting plate.
•
Loosen the Spin-3 Pan-Tilt head bolt with the
4mm Allen key and detach the motor gear.
•
Then rotate the Pan-Tilt adjustable arm and
balance it.
NOTE: Ensure to detach the motor gear before
rotating the Pan-Tilt head adjustable arm.
•
After balancing the Pan-Tilt adjustable arm,
now tighten the bolt using a 4mm Allen key.
NOTE: The 3-Axis Spin-3 pan-tilt head ensures a
perfect camera balance and offers smooth
camerawork at all times.
•
Now, loosen the Pan-Tilt adjustable arm bolt
using a 4mm Allen key, rotate the Camera
mounting plate and balance it.
•
Then, re-tighten the bolt using a 4mm Allen
Key.

Camera Mounting

•
Mount the Camera
camera plate and insert the bolt.
NOTE: The universal camera plate is adjustable
for different sized setups.
•
Tighten the bolt using the 3/16" L-type Allen
Key.
NOTE: The Head will pan tilt and roll through
360°, and this enables the camera to point
directly upwards or downwards when required.
(Not Included) on the
20