Joystick Controller Bracket Assembly - PROAIM Kite-22 Assembly Manual

•
Insert the other end of the Leveling cable
into the Turn Buckle and lock the cable.
•
Stretch the levelling
requirement.

Joystick Controller Bracket Assembly

•
Attach the Joystick Controller Bracket to the
Jib and insert the Shank.
•
Now, insert the washer and nut bolt to the
other side of the Joystick Controller .
•
Tighten the nut bolt using the 21mm Spanner.
•
Joystick Controller Bracket is now attached to
the Jib.
cable per your
17