•
Loosen the back knob (shown in the left
image) of the Ronin Controller bracket and
slide it onto the weight rod,
•
Re-tighten the knob to secure the bracket.
•
Now, loosen the top knob of the Ronin
Controller bracket and insert the controller
into the bracket's knob and tighten it.
Attaching the Cable Tie
•
After completing Scissor Jib installation,
retract the jib arm.
•
Attach cable ties to the hole of each frame, as
shown in the image.
•
Starting from the Hub Mounting, insert the
cables into the cable tie.
•
Now, tighten the cable ties.
NOTE: Maximize the length of scissor jib arm to
ensure that the cables remain spiraled, as
shown in the image.
Retraction/Expansion
•
The
forward/reverse
conveniently push out and pull in the jib arm.
Direction Control
•
The direction button lets you lock the
direction in which you want your jib to move
forward or in reverse.
buttons
let
you
11