Advantech Oem Command 'Read Configuration Settings - Advantech FWA-6171 User Manual

Command example:
ipmitool raw
•
Table 1: 'Store Configuration Settings' Command
This command is used to read the configuration settings and it is used to check the current NC-SI
"Keep PHY Link Up" setting.
Request Byte Data Field
Response Byte Data Field
_20220127_JH.DOCX
User Manual_FWA-6171
Command Sequence
>ipmitool raw 0x2e 0x40 0x39 0x28 0x00
0x04 0x03 0x01
39 28 00
>ipmitool raw 0x2e 0x40 0x39 0x28 0x00
0x04 0x03 0x00
39 28 00
4.1.3 A
DVANTECH
1 NetFn: 0x2e
2 Cmd: 0x41
3 IANA Byte 1: 0x39
4 IANA Byte 2: 0x28
5 IANA Byte 3: 0x00
6 Setting
04h: LAN controller
7 Port
Setting: LAN controller
03h: NC-SI "Keep PHY Link Up"
1 Completion Code
00h: command completed normally
2 IANA Byte 1: 0x39
3 IANA Byte 2: 0x28
Copyright
OEM C 'R
OMMAND EAD
2017 Advantech Co. Ltd. All rights reserved.
Description
Enable NC-SI
"Keep PHY Link
Up"
Disable NC-SI
"Keep PHY Link
Up"
C S
ONFIGURATION ETTINGS
'
Page 78