Kits
Contents
Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
. . . . . . . . . . . . . . . . . . . . . . . . 26
Kits
The following kit is the Communications
Gateway Module (CGM) hardware/software and is
required for all installations. The kit is used in conjunc-
tion with the correct fieldbus device.
CGM Part No.
24J415
CGM Installation Kit (Required)
The following kits work with kit 24J415 and includes all
remaining parts necessary to install a CGM. See man-
ual 312864 for repair parts for each assembly.
CGM Part No.
CGMDN0
DeviceNet
CGMEP0
EtherNet/IP
CGMPB0
PROFIBUS
CGMPN0
PROFINET
2
Description
Fieldbus
Related Manuals
Manual
3A1974
CAN Adapter Kit, Instructions
312864
Communications Gateway Module,
Instructions - Parts
313997
HFR Operation
313998
HFR Repair - Parts
406987
GCA CAN Cables, Reference
Overview
The Communications Gateway Module (CGM) provides
a control link between the HFR system and a selected
fieldbus. This provides the means for remote monitoring
and control by external automation systems.
The data available by the CGM to the fieldbus depends
on which GCA based system is connected. Unique data
maps are defined for each GCA system and are avail-
able on the token provided in the kit.
See Available Internal Data on page 9 for a list of inter-
nal data from the HFR system that can be viewed or
modified by your fieldbus master.
NOTE: The following system network configuration files
are available at www.graco.com
•
EDS file: DeviceNet or Ethernet/IP fieldbus net-
works
•
GSD file: PROFIBUS fieldbus networks
•
GSDML: PROFINET fieldbus networks
Description
3A1704H