Table of Contents
Advertisement
System Components
The following components are required for performing a physiological parameter
procedure:
•
PressureWire X Guidewire
•
Aortic Pressure Transducer
•
Hemodynamic Recording System
•
Wi-Box AO Transmitter
•
Ultiri Measurement System
•
Adapter cable to connect the AO to the Wi-Box AO Transmitter
•
Monitor cable to connect the Wi-Box AO Transmitter to the
Hemodynamic Recording System
Wi-Box AO Transmitter
The Wi-Box AO Transmitter is installed in the catheterization laboratory between
the hemodynamic recording system and the AO. The position of the Wi-Box AO
Transmitter in a catheterization laboratory is shown below.
Wi-Box AO Transmitter in Catheterization Laboratory Configuration
2
3
The wireless connection to the Wi-Box AO Transmitter is made during set-up for
the procedure. Refer to the installed software User Manual for more information.
Note: Use only the power cable and accessories provided with the system. Use of
other cables or accessories may negatively affect electromagnetic compatibility
performance.
Ultiri™ Measurement System Operation Manual – 600327583 Rev. A
1
1.
PressureWire X Guidewire
2.
Aortic pressure transducer
3.
Hemodynamic recording system
4.
Wi-Box AO Transmitter
5.
Ultiri Measurement System
5
4
System Overview
19
Advertisement
Table of Contents
