Mounting - Abbott Ultiri 1015082 Operation Manual

Setting Up the System
22
Ultiri™ Measurement System Operation Manual – 600327583 Rev. A

Mounting

Use the mounting bracket supplied separately by Abbott Medical (or an existing
bracket compatible with standard Video Electronics Standards Association
[VESA] 75 x 75 mm or 100 x 100 mm) to mount the unit.
Follow the instructions provided with the mounting bracket to attach it to the
1.
back of the unit.
Mount the unit in the desired location in the catheterization laboratory. Do
2.
not tilt the unit backward more than 45 degrees from vertical. To prevent the
risk of ingress of liquids (e.g., IV infusion), do not mount the unit tilted
forward.
WARNING: Do not use the Ultiri Measurement System if it has been dropped,
or in any other way exposed to mechanical or electrical damage, or if liquids
are suspected to have penetrated the casing or the power supply unit. This can
cause the user to be exposed to electric shock or loss of system function.
Contact Abbott Technical Service for further instructions.
If a table-top stand is used, the table should be horizontal. Ensure that the
mounting is secure and that the position of the unit is stable.